How Do I Clean Clogged Nozzles In Pressure Washers?

Clogged Nozzles
  1. Always disconnect your spray wand from the gun before cleaning your nozzles!
  2. Clear the nozzle with a small rigid piece of wire such as a paper clip.
  3. Flush the nozzle backwards with water.
  4. Reconnect the wand to the gun.
  5. Restart the pressure washer and depress the trigger on the spray gun. If the nozzle is still plugged or partially plugged, repeat number 1-4. 


 If the previous procedure does not clear the nozzle, replace with a new nozzle. 

Share this post

Leave a comment